eGlu Products
Products
HUB-Pro
eGlu HUB-Pro acts as a communication gateway between all the eGlu devices, installed at your home, and the eGlu cloud server. It is powered by a 5V DC adaptor. HUB-Pro acts like a local server with in-built intelligence even when the internet is not available. HUB-Pro comes with a built-in battery backup with an option to configure multiple Wi-Fi profiles. A push-button, provided at the back of HUB-Pro, can be used to re-configure the Wi-Fi settings.
eGlu HUB
eGlu HUB acts as a communication gateway between all the eGlu devices installed at home and your Wi-Fi router. It is a pluggable device and draws power from the AC wall outlet. A push button provided on the HUB can be used to re-configure the HUB if the Wi-Fi settings of your router are changed.
Door Sensor
Door Sensor helps in monitoring the opening and closing of the doors and windows. It also provides the real time state of the door/window on which it is installed. Apart from sensing door, it can also be used as a presence sensor or a remote button.
Motion Sensor
Motion Sensor detects movement of people. It can be used to alert an intrusion or for detection of unoccupancy in a room. Motion Sensor is powered by batteries and can be conveniently placed on any flat surface or hung on a wall.
In-wall Dual Switch
In-wall Dual Switch Module allows automation of regular lights, power sockets and fans. IWS-2S comes with two switches of 6A rating. It is installed behind the existing switch plate and works in parallel with the mechanical switches.
In-Wall Triple Switch
In-wall Triple Switch Module allows automation of regular lights, power sockets and fans. IWS-3S comes with three switches each rated at 6A load. It is installed behind the existing switch plate and works in parallel with the mechanical switches.
In-Wall Dual Dimmer
In-wall Dual Dimmer Module allows automation of dimmable lights. IWS-2D comes with two dimmers of 0.5A rating each. It is installed behind the existing switch plate and works in parallel with the mechanical switches. Each dimmer can also be used as an ON/OFF switch as long as the load is less than 0.5A which is good enough for most of the LED lights.
In-Wall Triple Dimmer
In-wall Triple Dimmer Module allows automation of dimmable lights and set lighting intensity. IWS-3D comes with three dimmers of 0.5A rating each. It is installed behind the wall switch plate and works in parallel with the mechanical switches. Each dimmer can also be used as an ON/OFF switch as long as the connected load is less than 0.5A.
RGB LED Controller
RGB LED Controller is designed to control the colors and intensity of the RGB LED strip which is typically used for ambience lighting. RGB LED Controller requires an external 12V DC power supply and the RGB LED strip.
In-wall 16A Switch
In-wall 16A Switch Module can be used to remotely control or automate high power appliances like geysers, air conditioners and motor pumps with maximum load up to 16A. It is installed behind the existing switch plate and works in parallel with the mechanical switch.
IR Controller
IR Controller allows you to control all your appliances like AC, TV, Set-top Box, DVD Player, Music System etc. which are controlled by their individual IR remotes. Standard remotes can be downloaded from the eGlu APP. You can also create your custom remotes by using the learning feature provided in the IR Controller.
Curtain Controller
Curtain Controller lets you control your motorized window curtains as well as motorized main gates. It supports all the motors which use AC phase switching for open and close operations. Curtain Controller can support up to 6A of AC motor load. It also has an option to connect physical bell switches for local control.
Gate Controller
Gate Controller lets you control your motorized main gate. The controller is connected in parallel to the existing wired remote controller of the gate which typically has three buttons for open, close and stop functions.
Yale Lock Controller
Yale Lock Controller is designed to remotely operate your Yale locks which are compatible with the K-type or N-type Yale receiver/transceiver modules. The Yale receiver module is installed in the lock and the Yale transmitter module is interfaced with the Yale Lock Controller, which also provides power to the transmitter module.
Sensor Monitor HV
Sensor Monitor is designed to convert an existing wired sensor like smoke detector, gas leak detector etc. into a wireless sensor. The only requirement is that the wired sensor should have an ‘NO/NC’ trigger. SMHV also provides a 12V/100mA DC output which can be used to power the wired sensor.
Sensor Monitor LV
Sensor Monitor is designed to convert an existing low power sensor like Motion Sensor, Glass Break Sensor etc. into a wireless sensor. The only requirement is that the wired sensor should have an ‘NO/NC’ trigger. SMLV can be powered from the same DC source which is powering the sensor, mostly a battery. SMLV can monitor three ‘NO/NC’ Inputs. ‘NO’ connection is recommended as it increases the battery life.
Dual Relay Controller
Dual Relay Controller is a general purpose automation device. It contains two relays with voltage rating of 220V and current rating of 6A. The relays can take both AC and DC inputs for the given ratings. Dual Relay Controller also has the option to connect physical AC switches for the local control of the relays.
Triple Relay Controller
Triple Relay Controller is a general purpose automation device. It contains three relays with voltage rating of 220V and current rating of 3A each. The relays can take both AC and DC inputs for the given ratings.
Repeater
eGlu Repeater module extends the range of eGlu wireless network. Normally most of the AC powered eGlu products can be configured to act like a repeater. In some cases existing powered devices can not be used as effective repeaters because of their position. In those cases, a stand alone repeater can be installed.
Panic Alarm
Panic Alarm produces loud sound when turned on. It can be activated based on various events like intrusion, opening of a door or pressing of the panic button on the TAG. Panic Alarm is powered by batteries and can be conveniently placed on any flat surface or hung on a wall.
Smart Plug 6A
Smart Plugs 6A convert existing wall socket into a remote controlled switch. Any appliance which takes a maximum load current of 6A can be used with this plug. Examples: Lamps, Table Fans, Coffee Maker, Decorative Lights. Use the push button for local control.
Smart Plug 16A
Smart Plugs 16A can we used to remotely control or automate high power appliances like geysers, air conditioners and motor pumps. The plug also has a push button which can be used for local on/off control.